Asko TDC33, Руководство по обслуживанию

Страница: 12 / 86

10
INSTALLATION
2
1
3
Install the tower configuration like this:
1. Unscrew and remove the outermost screws
from each side of the rear of the washing
machine.
2. Screw the angle pieces to the rear of the wash-
ing machine.
3. Secure the two plastic cups to the front edge
of the top cover.
WARNING
The plastic cups must be fitted, they secure the
front edge of the tumble drier.
Right side: Break off the left-hand tag from
one of the plastic cups and remove the paper
from the underside. Position the cup so that
the arm that sticks out is flush with the top
cover and press it firmly into place.
See Figure 3.
Left side: Break off the right-hand tag from
the other plastic cup and remove the paper
from the underside. Position the cup so that
the arm that sticks out is flush with the top
cover and press it firmly into place.
See Figure 3.
4. Position the tumble drier by fitting the two
angle pieces into the slots at the rear of the
tumble drier while keeping the front edge of
the tumble drier raised by 1 - 2 cm.
5. Lower the tumble drier so that its front feet
enter the plastic cups. Adjust the feet as neces-
sary to straighten the tumble drier vertical.