ashtech Reliance FS/2, Руководство по эксплуатации

Страница: 85 / 186

Reference 69
Ref
eren
ce
FAMLog Screen (MAIN)
The FAMlog screen, Figure 4.1, shows projected FS/2 memory and battery power
and the projected receiver memory and battery power.
Table 4.2 describes the FAMlog screen fields.
Figure 4.2: FAMlog Screen (MAIN)
Table 4.2: FAMlog Screen Field Desciptions
Field Description
POWER ON or OFF, indicates current power status of the receiver. If power is shown as
???, this indicates that the FS/2 is not communicating with the GPS receiver.
Check the cables, then cycle power on the receiver using shift F1 (POWR).
SESSION Identification of the GIS data collection session. Blank until a session name is
entered on the SETP screen, or shows the previous session name.
HANDHELD MEMORY Percent remaining handheld memory.
HANDHELD POWER Percent remaining FS/2 handheld battery power.
RECEIVER POWER Percent remaining receiver battery power. When a new receiver battery is
connected, the Battery Management screen must be used to set remaining power
to 100%—otherwise, the receiver does not know that a new battery has been
installed.
RECEIVER MEMORY Percent remaining receiver memory. Number decreases whenever the receiver is
on, since data are recorded continuously.