manualshive.com logo in svg

ASG OM Series, Руководство пользователя

Поделиться
Скачать
ASG OM Series Скачать руководство пользователя страница 21

ASG, Division of Jergens, Inc.  

15700

 S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | Web: www.asg-jergens.com

21

Part Adjustments and Replacement (Continued)

Replacing the Passing Plate

Turn OFF the power switch before starting replacement and adjustment.

•  Use the passing plate, rail and escape that correspond with the diameter of the 

screws to be used.

•  Remove the passing plate. Do not lose the attached bolts. Using bolts other than 

those supplied with this machine may result in a malfunction. 

•  Refer to Check and Adjust the Passing Plate for adjustment.

Replacing and Adjusting the Brush

Turn OFF the power switch before starting replacement and adjustment.

•  If the brush is too worn to sweep screws off of the rail, replace it.
•  Turn ON and OFF the power switch in order to set the brush bristles facing to the 

left and detach the brush assembly.

•  The brush assembly can be disassembled as shown in the figure on the right.
•  After reassembling, check that the front part of the brush doesn’t come in contact 

with the passing plate. The ideal clearance is 0mm.

•  For adjustment, refer to Adjusting the Brush Height on page 10.

!

!

Содержание OM Series


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды