ASG OM Series Скачать руководство пользователя страница 2

Страница: 2 / 33

ASG, Division of Jergens, Inc.

15700

Operating Precautions

This manual contains safety alert symbols and signal words to help prevent injuries to
the user or damage to property.

This indicates there is a chance of death, serious injury, or fire if the
instructions are not followed.

Symbols Indicating Type of Danger and Preventative Measures:

Prohibited operation. Never do this!

Do not disassemble, modify, or repair.

Do not touch with wet hands

This indicates to stop operations

Unplug power supply from wall outlet

General caution

Warning

Do not disassemble the AC adapter as there is a risk of electric shock, fire, or
malfunction.

Do not damage, alter, or change the power cord. Do not place heavy objects
on the cord. Do not pull hard on the cord or twist the cord as it could be
damaged, thereby causing a risk of fire or electric shock.

Do not handle the AC adapter with wet hands as it could cause an electric
shock.

Содержание OM Series


































Результаты поиска

Содержание OM Series

Отзывы:

Бренды по названию

Популярные бренды

ASG OM Series, Руководство пользователя

Результаты поиска

Содержание OM Series

Отзывы:

Бренды по названию

Популярные бренды