manualshive.com logo in svg

ASG OM Series, Руководство пользователя

Поделиться
Скачать
ASG OM Series Скачать руководство пользователя страница 18

ASG, Division of Jergens, Inc.  

15700

 S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | Web: www.asg-jergens.com

18

Part Adjustments and Replacement (Continued) 

Replacing and Adjustment of the Escape (Continued)

3.  Check the position of the parts for smooth delivery of the screws.

Check that the clearances between the outside edges of the rail and the 
robot escape guide right and left are almost even. If they are in contact, 
the screws cannot be delivered.  If there is too much clearance on either 
side screws may fall into the machine. 
At this time, make the top surface of the escape even to or 0.1 - 0.5mm 
lower than the rail surface. If it’s too high, the screw won’t enter an escape 
notch. If it’s too low, a screw will not enter a notch properly. 
If any adjustment is required, remove the cover, loosen the escape bracket 
attaching screw and move it up or down, left or right and tighten the 
screw.

!

Содержание OM Series


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды