manualshive.com logo in svg

ASG OM Series, Руководство пользователя

Поделиться
Скачать
ASG OM Series Скачать руководство пользователя страница 11

ASG, Division of Jergens, Inc.  

15700

 S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | Web: www.asg-jergens.com

11

Adjustments and Checks before Use (Continued)

Checking and Adjusting the Rail Vibration

•  The amplitude and frequency of the rail vibration can be adjusted.
•  The vibration has been adjusted at the factory for screws that correspond with the 

rail.

•  Put some screws into the rail and turn the power on.  If they are delivered 

smoothly, there is no need for adjustment.

•  The screw transport feed differs depending on screw type.
•  For screws with a low transport speed or screws that easily escape from the rail, 

an adjustment is necessary.

1.  Turn the frequency adjusting knob (first hole at the top in the back of the 

machine) using the accompanying screwdriver. Find the frequency at which the 
rail vibrates appropriately.

2.  Turn the amplitude adjusting knob (second hole from the top) and find the 

amplitude for which screws are delivered smoothly.

•  If the vibration is adjusted too high, screws may escape from the rail and fall 

into the machine. Adjust the vibration to a proper value that matches the loaded 
screws.

•  With the accompanying screwdriver, turn the knob without using excessive force.

Содержание OM Series


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды