manualshive.com logo in svg

ASG OM Series, Руководство пользователя

Поделиться
Скачать
ASG OM Series Скачать руководство пользователя страница 1

ASG, Division of Jergens, Inc.  

15700

 S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | Web: www.asg-jergens.com

1

Before Use

Please check for the following accessories before operating the machine:

Table of Contents

Overview  .................................................................................................................1 
Before Use ...............................................................................................................1
Operating Precautions .............................................................................................2
Names of Parts .........................................................................................................5
Adjustments and Checks Before Use ........................................................................7
Maintenance ..........................................................................................................15
Parts Adjustments and Replacements ....................................................................15
Application with Robotic System ...........................................................................25
Miscellaneous ........................................................................................................27
Troubleshooting .....................................................................................................29
Specifications .........................................................................................................31
External Dimensions ..............................................................................................32
Warranty ................................................................................................................33

Overview

Thank you very much for selecting the OM Series Automatic Screw Feeder This machine 
can line up screws (Type M2 - M6) and supplies them one by one to help the efficiency 
of screw fastening work. Different sizes of screws can be used by changing the rail and 
parts of the escaper assembly. It can be used wherever there is a power source for an 
AC adapter. Note: Only steel screws may be used with this machine. Stainless steel or 
plastic screws cannot be used.

• 

(1) Instruction Manual

• 

(1) AC Adapter

• 

(1) Hexagonal Wrench

• 

(1) Screwdriver

•  Read these instructions for the proper use of this machine.
•  After having read these instructions, keep them in a convenient place so you or 

the operator can refer to them whenever necessary.

OM-R Manual

Содержание OM Series


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды