ASG, Division of Jergens, Inc.
15700
S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | Web: www.asg-jergens.com
Page 8 of 13
Just Move Mode
In Just Move Mode, the torque recorded after a pre-defined number of degrees
(defined in Set Mode) will remain on the OLED display when the load is removed, as
long as the torque loaded is above the 10% of maximum capacity threshold. The final
torque and final angle measurements will also be displayed. The user has the option
to store the reading in memory. If storage of the reading is not required, the user may
continue to the next measuring task.
Step 1:
Press to scroll to Just Move Mode
Step 2:
Press to operate in Just Move Mode
Step 3:
Press to store the Just Move torque along with the final peak torque and
angle values. If storage is not required, then apply a new load to test again.
Modes of Operation
TAW Series Digital Torque Wrenches
Torque and Angle Model
User Manual
