ASEA AC36V-1, Руководство по эксплуатации

Страница: 7 / 66

AC36V-1, -3 / AC45V-1, -3 / AC54V-1, -3 Operations Manual....
7

THIS EQUIPMENT CONTAINS HIGH ENERGY, LOW IMPEDANCE CIRCUITS!
LETHAL POTENTIALS ARE CONTAINED WITHIN THE SYSTEM EVEN WHEN
IT IS APPARENTLY NOT OPERATING.

CARE MUST BE EXERCISED WHEN SERVICING THIS EQUIPMENT IN ORDER
TO PREVENT SERIOUS OPERATOR INJURY OR EQUIPMENT DAMAGE.

DO NOT WORK ON OR OPERATE THIS EQUIPMENT UNLESS YOU ARE
FULLY QUALIFIED TO DO SO. NEVER WORK ALONE.

THE EQUIPMENT IS NOT IGNITION RATED, IT MUST NOT BE OPERATED IN
AREAS WHERE COMBUSTIBLE GASES MAY ACCUMULATE.

OBSERVE THE FOLLOWING WHEN SERVICE AND MAINTENANCE ARE
REQUIRED:

REMOVE ALL JEWELRY FROM ARMS AND NECK WHEN SERVICING THIS
EQUIPMENT. THIS PREVENTS THE POSSIBILITY OF SHORTING THROUGH
THE JEWELRY, OR ELECTROCUTION OF THE OPERATOR.

WEAR SAFETY GLASSES WHEN SERVICING THIS EQUIPMENT TO PREVENT
EYE INJURY DUE TO FLYING PARTICLES CAUSED BY ACCIDENTAL SHORT
CIRCUIT CONDITIONS .

DO NOT REMOVE ANY PANELS OR COVERS WITHOUT FIRST OPENING ALL
SHORE POWER AND SWITCHGEAR CIRCUIT BREAKERS DISTRIBUTING
POWER TO AND FROM THE CONVERTER, AND THEN REMOVING THE
INPUT SERVICE.

SERVICE SHOULD BE REFERRED TO PERSONNEL AUTHORIZED BY THE
FACTORY TO SERVICE THIS EQUIPMENT.