ASEA AC36V-1 Скачать руководство пользователя страница 24

Страница: 24 / 66

AC36V-1, -3 / AC45V-1, -3 / AC54V-1, -3 Operations Manual....

6.1

POWER TURN-ON PROCEDURE, cont.

The display will sequence to the SUMMARY DISPLAY indicating the converter’s operational state.

Both input and output (converter) should indicate OFFLINE at this time. Press the

INFO

(13)

button to review the Shore Power state if desired. The INFO screen will either list the Shore Power

as ONLINE or give a reason for its being off if it was previously on. A press of the

(13) button

in the INFO screen will display the last known converter failure. Return to the SUMMARY

DISPLAY at any time by pressing the

SYSTEM STATUS

(5) button.

At this time both of the red LED indicators next to the

OFF

buttons (10A & 11A) should be lit. If

the system has been ordered with the Seamless Transfer option, and the generator is on-line, the

green LED (12A) to the left of the

GENERATOR

(12) button will be lit.

Press the

SHORE POWER

(2) display button. The display will indicate basic shore power

information: voltage, current, and kVA. Press the

(13) button to view kW, Power Factor,

frequency, and form. Verify the displayed voltages indicate the expected voltages and frequency. If

not, do not proceed until contacting factory personnel. Additional SHORE POWER information can

be obtained by pressing the

and

(13) buttons: peak currents and crest currents, percent of

system rating, and kVAR. Return to the primary screen by pressing the

(13) button.

SUMMARY DISPLAY AC36 MASTER

INPUT: OFFLINE CONVERTER: OFFLINE

LOAD LEVEL: 0.0 % AUTO-RESTART: ON

INFO STATUS

INPUT #1 PHASE A-B PHASE B-C PHASE C-A

VOLTAGE: 208V 208V 208V

CURRENT: 0A 0A 0A

LOAD: 0.0 kVA 0.0 kVA 0.0 kVA

Содержание AC36V-1



































































Результаты поиска

Содержание AC36V-1

Отзывы:

Бренды по названию

Популярные бренды

ASEA AC36V-1, Руководство по эксплуатации

Результаты поиска

Содержание AC36V-1

Отзывы:

Бренды по названию

Популярные бренды