TD 92675EN
9 December 2011/ Ver. D
Configuration Manual
Ascom i62 VoWiFi Handset
54
•
The group number to the PTT group (defined in the IMS3).
•
The phone number to the conference bridge.
Tip: For more information about the PTT function, see also
Function Description, Ascom
VoWiFi System
,
TD 92314EN
or
User Manual, Ascom i62 VoWiFi Handset
,
TD 92599EN
.
Note:
If Music on Hold (MOH) is used in the system it can effect an ongoing PTT group call. If
someone in the group conference answers another incoming call, MOH will be played for the
whole group.
1
Select Push-To-Talk > X (where X represents 1-10).
2
In the
Session name
field, enter a name to identify the PTT session.
3
In the
Group number
field, enter the number to the PTT conference group.
4
In the
Display text
field, enter a text to be shown in the display during the PTT
session.
5
In the
PTT session signal
drop-down list, select the indication of the PTT session.
6
In the
Conference number
field, enter the phone number to the conference bridge.
7
In the
Answer mode
drop-down list, select the answer mode for the PTT session.
8
In the
Speaker mode
drop-down list, select the speaker mode for the PTT session.
9
A
Service
must be configured to access the PTT session from the VoWiFi Handset. If
not configured, continue with
6.12.2 Services
.
6.14 Presence Management
To be able to configure presence management, the following must be known:
•
The IP address to the Presence Management system.
•
The user name and password used in the Presence Management system for each VoWiFi
Handset.
For more information about presence management, see
Function Description, Ascom VoWiFi
System
,
TD 92314EN
or
User Manual, Ascom i62 VoWiFi Handset
,
TD 92599EN
.
1
Select Presence > Common.
2
In the
Presence Management system
drop-down list, select presence management
system.
3
Select “Presence“ and the presence management system selected in previous step.
4
In the
IP address
field, enter the IP address to the presence management system.
5
In the
Listening port
field, enter the port number the presence management system
shall listen to.
6
In the
user name
field, enter the Enter the user name.
7
In the
password
field, enter the password.
If the Presence function is configured, it will be visible under Call > Presence in the VoWiFi
Handset. It is also possible to configure a shortcut in order to access the Presence menu, see
6.5.13 Shortcuts
on page 39.
6.15 Location
Two types of location are supported, either a basic location solution that gives an
approximate location using Access Point (AP) location, or a personal security solution that
