TD 92675EN
9 December 2011/ Ver. D
Configuration Manual
Ascom i62 VoWiFi Handset
36
2
Select the applicable item in the drop-down list:
IMPORTANT:
Do not select “Hearing protection” unless a Peltor headset is used.
•
Hearing protection
•
Mic on boom
•
Mic on cable
•
User model (If not any headset is used above, this option can be used to configure
an own headset profile. If selected, additional configuration is required, see
Headset user model
)
Headset user model
These settings are required if
User model
is selected under Headset > General.
1
Select Headset > User model.
2
In the
Name of headset
field, enter a descriptive name. For example the headset
model to be used.
3
In the following drop-down lists, select the applicable values for the headset:
•
Microphone gain
•
Speaker gain
•
Side tone
Note:
Changing the parameters may result in lower sound quality and high sound level.
Evaluate carefully before applying.
Corded headset button
1
Select Headset > General.
2
In the
Call with headset button
list, select one of the following:
•
Not activated – it is only possible to answer/end a call.
•
Last called number – the last called number will be dialled.
•
Predefined number – a predefined number will be called (if selected, continue
with step 3)
3
If needed, in the
Predefined number
field, enter the number to be dialled when the
headset button is pressed.
6.5.5
In Charger Behaviour
The handset behaviour when placed in a charger can be configured.
Call behaviour
1
Select Device > Call.
2
Choose a setting from the
In charger call behaviour
list:
•
No action
•
End – the handset will end an ongoing call when placed in a charger.
•
Put on Loudspeaker – the handset will turn on the loudspeaker when placed in a
charger during a call.
In charger action
1
Select Device > Settings.
