Ascendent X4S Series, Быстрая настройка

Страница: 22 / 41

22
The motion detection enabled zone is shown as a red transparent mask or a red
grid over the image. If you don’t want motion detection enabled in a certain area,
left click and drag to deselect areas. The picture above shows motion detection
enabled on across the whole image. In the example below, we have motion
detection enabled everywhere but the park area.
In the park area motion detection is disabled. For most applications use a
Sensitivity setting of 55, and a Threshold setting of 10. Click “Save” then click “Save”
again in the previous “Motion Detect” window.