Ascendent X4S Series, Быстрая настройка

Страница: 8 / 41

8
This is where you set each camera resolution and quality settings for each of the
recording modes (Regular/MD/Alarm). Main stream settings are one the left, the
sub stream settings are on the right. Main stream the recorded resolution, sub
stream is used when viewing multiple cameras on one screen and for mobile
viewing to reduce bandwidth and processor usage.
Select the camera channel number or select “All”. We recommend setting the
resolutions to the highest size available on each camera. Select the compression
type (H.264H is better than H.264, which is better than H.264B).
Select “VBR” bit rate type and quality “6”. Use the following bit rate (Kb/S) setting
depending on camera resolution: CIF=512/768, D1=1024/2048, 720P=2048,
1080P=4096, 3MP 2052 x 1536=6144, 5MP 2592 x 1920=8192. These are
recommended bit rate settings, you may want to select a higher or lower bit rate
depending on your requirements. Higher bit rate settings will increase storage
usage, but may improve image quality.
Click “Apply” then click “Next Step”.