ELECTRIC WIRE LIFT
22
BEFORE REQUESTING REPAIR OR SERVICE
● Inspect the unit as below before requesting repair or service.
If the problem is not solved after an inspection, please contact us or authorized
distributors for repair.
● If the unit got broken under improper usage or usage other than original
application, the repair is not covered by warranty.
Condition
Possible cause
Solution
The mast is not
lifted up
Over loading
Lifting up the load lighter
than the capacity
The center of the gravity of
the load is not at the center
of the aluminum plate
Keep the center of the gravity
of the load at the center of
the aluminum plate
The roller of the mast does
not rotate
Apply silicon oil
Dust or obstacle on the roller
of the mast
Remove dust or obstacle
The pulley wheel does not
rotate
Replace the pulley wheel if it
gets scratch as it does not
rotate smoothly
Scratch on the wire
Replace the wire if it gets
twisted, worn down and
frayed
Scratch on the mast
Replace the mast