ECOsaver V240SP
5
◆ When the Recovery Machine is dropped or hit, inspect immediately for
damage, crack, dent, etc.
Recovery under damaged, cracked and dented condition may cause injury
◆ Check every day if there is deformed or corroded area.
◆ If abnormal condition (strange smell, vibration, strange noise) is
noticed, stop the unit and refer to the Page24 “BEFORE REQUESTING
REPAIR OR SERVICES” in the manual.
◆ Request for repair or service instead of disassembling for repair,
contact the store where the machine was purchased.
◆ Use our cylinders that are expressly made for recovery and recycling.
◆ Evacuation should not be done when the Auto stop/run switch is at the
“Auto stop” position.
Air may be left in the machine.
Low pressure switch trips to stop the machine when the suction pressure of the
compressor is approximately -26cmHg/-10inHg and be released automatically when the
pressure goes up.
◆ Close the valve of cylinder certainly when not in use.
◆ Do not recover where ignitable things and inflammables exist.
◆ Prepare a fire extinguisher for unexpected condition.
Warning For Safety
CAUTION
Cautions for recovery of R32, R1234yf, R1234ze (specific inert gas)
