Immediately after threading, Dies, chips and threaded surface are hot.
Do not touch them directly with hands.
Fix Spindle Case to avoid moving while carrying the machine, hold
and lift the bottom of the machine.
When lifting the machine, bend your knees to avoid a load on your waist.
The machine stained with threading oil is slippery. Do not drop the
machine on your feet while lifting it.
Do not install the machine inclined or on an unstable place. The machine
falls down, causing injury.
Keep proper footing and balance at all times. You may tumble and get hurt.
Do not operate the machine when you cannot concentrate on your work,
e.g. when you are tired or while under the influence of alcohol,
medication or drugs. Otherwise, accident or injury may occur.
Before turning on the machine, make sure that hand tools used for
inspection or adjustment are removed from the machine. Accident or
injury may occur if you start the machine with hand tools on it.
Use only the accessories and attachments given in this manual and
our catalogs. A failure to do so will lead to accident or injury.
Die-Head is wet and slippery with threading oil. Do not drop it on your
feet while replacing.
Immediately stop the machine if something is wrong with the machine
or you have noticed unusual smell, vibration, sound, etc. during
operation, and refer to "6. TROUBLE SHOOTING" in this manual and
follow the corresponding instructions.
Repair should only be carried out by our sales representative. Otherwise
the machine may not show its performance or you may get injured.
Ask the shop of your purchase or our sales office.
Our products are in accordance with the relevant safety rules. Do not
modify them.
High Temperature
4
Other
