2) Installation
(1) Put the machine in a place free from moisture.
(2) Put the machine on a flat surface without play or on a flat work bench. In this condition, the Motor
side is higher than other parts.
（
fig.2
）
(3) Secure a sufficient space around the machine. A wide space is necessary particularly when working
long and heavy workpiece.
(4) It is mandatory to use Pipe Support for long and heavy workpiece. Avoid excessive force applied to
the machine which causes it to tilt.
(5) Make sure that the power source is equipped with a ground fault circuit breaker to avoid electric
shock.
(6) Use an earth clip when a power receptacle without a base for grounding is used.
(7) When an extension cord is used, use the one conforming to the applicable regulations.
Always ground the machine to avoid electric shock and resultant
death.
An extension cord used should be a three-core cabtyre cable having
an earth wire. Use a thick and durable cable for outdoor application.
Never install an earth on the gas pipe. Explosion may take place.
Do not put the machine with Vise side higher than other parts.
Do not use the machine in rain or outdoors. Die-Head or Dies will rust.
High
Low
〈
2
〉
Motor Side
11
