2-2)
Removing and Installing Die-Head
〔
Removing Die-Head
〕
(1)
Set gaps on Spindle and Set Ring at same position.
（
fig.7
）
(2)
Fit together holes on Die-Head and Spindle Pin, Make sure Spindle and Die-Head joints fit
perfectly. (fig.8
）
(Fitting surface must be cleaned without cutting tips or other foreign bodys.)
(3)
Slide Set Ring by hand and fix Die-Head.
(4)
Insert Set Lever to the hole on Set Ring and make impacts a few times toward (A) direction by
hand to tighten.
（
fig.9
）
(5)
To remove, apply pressure on Set Lever to (B) direction.
〈
7
〉
〈
8
〉
〈
9
〉
･
When remove Die-Head, hold it by hand not to fall down.
・
Die-Head will be removable once Set Ring released.
14
