Asada 200SP Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 20

Asada 200SP Скачать руководство пользователя страница 7

PIPE SAW 200SP

6

◆ When carrying the machine, disconnect the power cord.

Otherwise, the machine will run suddenly, causing an accident or injury.

◆ Never touch the saw blade, chips and work piece immediately after

cutting operation.

Immediately after cutting operation, they are hot and you can get burnt or injured.

◆ Pay attention not to cut the power cord by the saw blade.

You may get electrical shock.

◆ Before starting operation at a high place, fully make sure that there

is no one under you.

An accident can occur if you drop a work piece or the machine.

◆ When you cut a pipe near an obstacle such as a wall or an adjacent

pipe, leave an enough clearance to prevent the nose of the saw blade

from making contact with the obstacle.

The machine or the saw blade may be broken.

◆ Do not cut the work piece which requires more than capacity.

If cut the work piece which requires more than capacity the saw blade may be

broken.

◆ Use the Asada genuine saw blade.

If use the other saw blade there may be a possibility to cause accidents

unexpectedly.

OPERATING

INSTRUCTIONS

CAUTION

«
...
5
6
7
8
9
...
»

Содержание 200SP





















Отзывы:

Нет отзывов