PIPE SAW 200SP
3
◆ Switch off and unplug the machine in the following cases.
・ When not in use or when servicing, cleaning, checking or replacing parts.
・ When replacing accessories such as saw blade.
・ When hazard is predictable (including a power failure).
If the machine remains plugged in, it will start suddenly, leading to injury.
◆ If you feel something unusual, stop the machine immediately.
Immediately stop the machine if something is wrong with the machine or you
have noticed unusual smell, vibration, sound etc. during operation. Refer to "P.18
TROUBLESHOOTING" in this manual and follow the corresponding instructions.
If you use the machine without taking any action, it will overheat, emit smoke or take
fire, leading to accident or injury.
If the machine has emitted smoke or took fire, do not disassemble it but have it
inspected or repaired by a qualified person.
◆ Keep your work area clean.
Keep your work bench and area tidy and well lit.
Cluttered areas and benches invite injury.
◆ Keep visitors away.
Do not let visitors touch the machine and power cord or operate the machine.
All visitors, especially children, should be kept away from the work area to avoid
injury.
◆ Do not force the machine.
Use the machine for the intended application only.
It will do a better job and be safer at the rate for which it was designed.
Forcing the machine will not only invite product damage but also lead to accidents.
Avoid forcible usage which will cause the motor to lock. A smoke or fire may occur.
◆ Wear proper apparel.
Do not wear neckties, open-sleeved clothing, knitted gloves, loose clothing or jewelry
(such as necklaces). Otherwise you may get caught in moving parts.
Rubber gloves and non-skid footwear are recommended when working in outdoors.
Slippery gloves and footwear will lead to injury.
Wear caps or protective hair covering to contain long hair. Otherwise, you may get
caught in moving parts.
Wear crash helmets, safety shoes, etc. according to your working environment.
◆ Do not overreach.
Keep proper footing and balance at all times. You may tumble and get hurt.
◆ Remove wrenches and other hand tools.
Before turning on the machine, make sure that hand tools used for inspection or
adjustment are removed from the machine.
Accident or injury may occur if you start the machine with hand tools on it.
SAFETY INSTRUCTIONS
WARNING