PIPE SAW 200SP
5
◆ Do not cut a pipe which contains live gas or residual gas.
Sparks or cutting heat from the motor can cause ignition or explosion.
◆ Do not operate the machine near hazardous materials such as
flammable gasoline, gas and thinner.
They can cause ignition or explosion.
◆ In case to cut a pipe with water remaining inside, avoid being
splashed water onto the machine.
If the machine is splashed, it will lead to electrical shock.
Water will come into the gearbox, and the gears will get damaged.
● In addition to the general instruction given above, follow the precautions given
below before operating the PIPE SAW 200SP.
OPERATING INSTRUCTIONS
◆ Operate the machine with the voltage indicated in the machine plate.
If the operating voltage is higher than indicated, the machine will run at abnormally
high speed, causing injury. If the operating voltage is higher than indicated, heat,
smoke or sparks may be generated.
◆ Before starting operation, fully check for underground objects such as
conduit pipes, water pipes and gas pipes near the place of operation.
If there are such objects, the saw blade may touch any of them and electrical
shocks, electric leaks or gas leaks which will cause accidents may occur.
◆ Hold the machine body securely during operation.
If you do not hold it securely, you may get injured.
◆ If the machine is not in good order or generates unusual noise,
immediately switch it off to stop operation and request your sales
representative for inspection or repair.
If you continue to use the machine, you may get injured.
◆ If you have dropped or hit the machine accidentally, carefully check
its saw blade, body, etc. for damage, crack or deformation.
Damage, crack or deformation to the saw blade or machine body will lead to
accident or injury.
◆ Before changing the saw blade, always disconnect the power cord.
Otherwise, the machine will start running suddenly, causing injury.
◆ Install the saw blade to the machine correctly.
Otherwise, if the saw blade comes off, you may get injured.
◆ During operation, keep your hands, face, etc. away from the saw
blade and chip ejector.
Otherwise, you may get caught by the saw blade, causing an accident or injury.
OPERATING
INSTRUCTIONS
WARNING
DANGER