Artize QUADRO OXYPOOL, Руководство пользователя

Страница: 21 / 27

20
USER MAINTENANCE INSTRUCTIONS
Cleaning The Tub Surface
• For daily maintenance cleaning, use a moist cloth and gentle liquid detergent
• For acrylic surfaces, occasional use of a special acrylic surface cleaner will add lustre and protect the finish
• Proper care and maintenance will preserve the high gloss acrylic finish
• To properly clean the surface, wipe with a soft damp cloth, or sponge, using household soap or liquid detergent
• DO NOT USE abrasive cleaners, scrapers, metal brushes, or any items or products that could scratch or dull the
surface. HARSH CHEMICALS SHOULD NOT BE USED ON SURFACE
• The jets can be removed for cleaning. Use wrench provided with the tub. Do not remove the protective cover on
the suction return for cleaning The only time the protective cover is removed is to replace the decorative ring
• Alcohol may be used to remove glue, adhesives, etc. from the surface
Cleaning The Pump And Plumbing System
After the tub is installed and ready to use, remove all construction debris and clean the tub and pump system. Clean the pump
and plumbing system before first use and every month thereafter, regardless of utilisation. This is easily done as follows:
1. Set air control knobs to the closed position (turn counter clockwise).
2. Using hot water only, fill the tub to at least 2 inches above the highest jet.
3. Add 2 tablespoons of low sudsing automatic dishwasher detergent. Every other month use 1I2 cup of household bleach for
cleaning the system, along with the detergent powder.
4. Operate the whirlpool for 20 minutes.
5. When the pump system stops (except on Air Switch units which have to be turned off manually), drain the water from the tub.
BATH ADDITIVES
A drop or two of a biodegradable liquid soap will cover you and the tub with bubbles. Most people enjoy having a few bubbles floating around
them. Artize does not recommend using use oil based products because the oil will settle in the oxypool system. The oil can also create an
environment conducive to bacterial growth. However, if you choose to use oil based additives, you must clean the system as outlined below
immediately after use. Bath soaps have a variety of products usable in your whirlpool bath, that do not contain oil. They have many fragrances
that can enhance your whirlpool pleasure.
Be sure that any items you select for your bathing pleasure do not contain OIL ADDITIVES!
Enjoy your oxylpool... There is no finer whirlpool made than an Artize oxypool...