background image

04

Persons under a doctor's care, pregnant women, persons with high or low blood pressure, heart disease, diabetes, or any serious illness,
should not use this unit without prior consultation with their physician. Never use this unit while under the influence of any drug or alcohol.

The maximum temperature of the water should never exceed 104°F (40°C).

IMPORTANT SAFETY INFORMATION

WARNING

To reduce risk of injury, enter and exit the bath carefully.

Do not fill the tub beyond the air volume controls or the overflow.

Never operate the oxypool system if there is less than 2" (5 cm) of water over the highest whirlpool jet (except   for the back jets) or if the
bathtub is empty.

Do not bathe pets in your whirlpool. Their hair could clog the pump.

Make sure the water temperature does not exceed 104°F (40°C). Damage and discoloration of the acrylic surface may occur.

The oxypool should be drained after each use.

Oil-based additives must not be used, and cleaning instructions must be followed. Do not use harsh abrasives or solvents for cleaning
your oxypool.

INFORMATION TO PREVENT DAMAGE TO EQUIPMENT

CAUTION

• SAVE THESE INSTRUCTIONS  •

Содержание QUADRO OXYPOOL




























Отзывы: