Y1-03-0272-1 Rev. C
A3-06-2824-1 Handheld Programmer Operations Manual
Company Confidential
Page 21
space ( ), and a slash (/).
•
If fewer characters are entered, that will be reflected in the final hex code.
•
Spaces are automatically filled in on the left of the data.
6.
Tap
“
Done
”
when finished.
7.
Tap “ENTER” button on
Program screen. The 24-digit hex code is shown at the
bottom of the screen, with the abbreviated 15-digit hex code below it.
8.
For ELT 345s or ELT 1000s only:
tap “Program”; quickly place ELT switch in
the test mode and release. (Quickly is <1 second).
9.
Tap the “Program” button to program the ELT
.
10.
Ensure that screen shows “Programming Successful”
.
11.
Verify ELT using
“Sarcalc”
, as described in Subsection 5.2.
4.6.2
Serial User / ELT / COSPAS (Short)
1.
Select ELT 9600 Baud rate or ELT 345/1000.
2.
Select Protocol.
3.
Select Country Code.
4.
Go to Graffiti screen and tap on letter/numbers.
5.
Enter the serial number, which matches the serial number seen on the product
label, or a number that was designated for use by the competent national
authority.
6.
Enter the COSPAS-SARSAT TAC number.
7.
Tap
“
Done
”
when finished.
8.
Tap “ENTER” button on
Program screen. The 24-digit hex code is shown at the
bottom of the screen, with the abbreviated 15-digit hex code below it.
9.
For ELT 345s or ELT 1000s only:
tap “Program”; quickly place ELT switch in
the test mode and release. (Quickly is <1 second).
10.
Tap the “Program” button to program the ELT
.
11.
Ensure that screen shows “Programming Successful”.
12.
Verify ELT u
sing “Sarcalc
, as described in Subsection 5.2.
4.6.3 Serial User / Aircraft 24-Bit Addr (Short)
1.
Select ELT 9600 Baud rate or ELT 345/1000.
2.
Select Protocol.
NOTE: Country Code will be blank. It will automatically be selected by entry of
a valid 24-Bit Aircraft Address.
3.
Select the desired number system (Octal: 8 digits from 0-7 or Hex: 6 digits from
0-9 or A-F) to match the format of the 24-bit address provided.
