Y1-03-0272-1 Rev. C
A3-06-2824-1 Handheld Programmer Operations Manual
Company Confidential
Page 16
must have a battery installed. If a 406 MHz burst takes place during
programming, there is a possibility that the programming will fail.
3. Plug the programming cable into the ELT
4. Connect the cable to the Handheld Programmer.
Table 1 provides data for programming ELTs with certain protocol types. This
information is not used in all protocol types; hence, programming software may not ask
for this information.
The Artex Programming Software divides the Models based on baud rates into the
following families:
•
9600 baud ELT
•
ELT 345/1000
To program, select
“Artex” from the Main Screen and then “Program” from the Artex
Software Main Screen.
Artex Main Screen
ELT 1000 will Display Baud Rates
