Y1-03-0272-1 Rev. C
A3-06-2824-1 Handheld Programmer Operations Manual
Company Confidential
Page 28
Figure 8: Programming Successful Screen
Proceed to Section 5, Programming Verification. The programming may be printed now,
but it is recommended the ELT be verified first.
The Artex programming software provides the means to determine battery usage and
total battery activations.
NOTE: The software routine logs battery life in 30-second increments for the ME406.
A minimum of 30 seconds is added to the battery usage total each time the
ELT is activated and de-activated. If the ELT is left activated beyond the first
30 seconds, additional time is added in 30-second increments.
ELT 345/1000
Battery usage is given in hours and minutes, plus total number of activations (count) is
also provided. To read the battery data:
1.
Tap the Artex icon on the Home screen.
2.
Tap the upper left-hand corner of the Artex main screen (Artex ELT Programmer
header) to get the Screens drop-down menu.
3.
Select “Read” in the drop
-down menu.
4.
Ta
p the “Down” arrow
.
5.
Momentarily hold ELT in test mode;
quickly tap “set”, read “batt”
, and release.
ELT ME406
1. Tap the Artex icon on the Home screen.
2. Tap the upper left-hand corner of the Artex main screen (Artex ELT Programmer
header) to get the Screens drop-down menu.
3.
Select “
R
ead” in the drop
-down menu.
4.
Tap the “Down” arrow,
and
read “batt”.
