Artesyn AXP1440, Инструкция по установке и эксплуатации, Страница: 26 / 156

Safety Notes
24 AXP1440 Installation and Use (6806800H23U )
Whenever removing the RTM from the system, you have to power down the payload of the
front blade first.
RTM Malfunctioning
Incorrect RTM installation and removal can result in RTM malfunctioning.
When plugging the RTM in or removing it, do not press on the face plate but use the handles.
RTM Damage
Installing the RTM with other blades than the ones designed for it may damage the RTM and
the front blade.
Only install the RTM with the correct front blade.
Data Loss
Removing the RTM with the system power on and the blue LED on the front blade still flashing
causes data loss.
Before removing the RTM from a powered system, power down the slot by opening the lower
handle of the front blade and wait until the blue LED is permanently ON.
Blade Malfunctioning
Incorrect blade installation and removal can result in blade malfunctioning.
Make sure that the blade is connected to the system backplane through all assembled
connectors and that power is available on all zone 1 power pins.
Operation
System Overheating
Cooling vents
Improper cooling can lead to blade and system damage.
To ensure proper cooling and undisturbed airflow through the system always operate the
system in a horizontal position and keep clear at least 60 mm at the back of the system. Do not
obstruct the ventilation openings at the top and back of the system. Keep the fresh air intake
at the bottom front side of the chassis completely clear, and ensure that fresh air supply is not
mixed with hot exhaust from other devices.