Artesian Spas platinum series, Руководство пользователя

Страница: 27 / 44

MAINTAINING YOUR SPA
DRAINING YOUR SPA
Your spa needs to be drained, cleaned, waxed, and refi lled about
every six months. More frequent water changes may be necessary if
bather load is heavy. A hose bib has been provided below the left side
of your front access panel, to assist you in draining your spa.
1) Turn off the power to your spa. If
you fail to turn the power off, vital
components could be damaged. Do
not leave an empty spa exposed for
long periods of time in hot, sunny
weather.
2) Attach your garden hose to the hose
bib.
3) Place the other end of the hose in
an area that will accept the water
capacity of your spa.
4) Open the hose bib by turning the valve knob counter-
clockwise to the full stop position.
5) Check the garden hose end to see if water is fl owing. If water
is not fl owing, check the hose for kinks. Also check to see if
valve is in the full open position.
CAUTION: The chemical content and temperature of the water will
cause damage to certain vegetation. We do not recommend that
you drain your spa onto plants or lawns. If you choose to do this,
please remove your spa cover and allow spa to cool for a mini-
mum of 24 hours with the spa turned off.
PILLOW CARE
Remove and clean the pillows with soapy water and a soft cloth when
needed. Use a vinyl conditioner once a month. Remove pillows when
doing chemical shock treatment.
Valve Knob
Hose Bib
JET CARE
We recommended tthat you clean your jets when you drain your spa.
However, if you do need to clean your jets in between this can be
accomplished with a full spa.
1) To remove the jet inserts turn
the jet counterclockwise to the
off position until it stops.
Continue to turn the jet past the
stop point to loosen it from the
spa. The insert will now pull out.
2) Soak jet inserts in a mixture of
1 part vinegar to two parts warm
water for 2-3 hours. Periodically
rotate the spinner nozzle to
break up residue in the jets.
4) Rinse the jet inserts under warm
water.
5) To reinstall the jets insert jet into
jet body and turn clockwise until
fully seated then tug to make
sure it is seated properly. You
can then continue to turn clock-
wise until it stops.
NOTE: A jet with stainless steel escutcheons can be slippery. You
can use a soft cloth or jar-opening pad to assist in removing and
installing the jet.
49 48