Artesian Spas platinum series, Руководство пользователя

Страница: 25 / 44

45 44
USING THE AUDIO cont.
TONE
- Press “Next Page” key to go to page 2 (or 3) of the Audio Key Menu
(if not already in page 2 (or 3).
- Press “Tone” key to select (in order): bass, treble, balance,
fader, or volume.
- To change the desired parameter, use “+” or “-” key.
- Bass control adjusts the amount of low frequency that you hear.
- Treble control adjusts the amount of high frequency that you hear.
- Balance control adjusts the amount of sound output to the left and
right speakers.
- Fader Control: Adjusts the amount of sound output (see Fader key
on next page).
Note: Bass and Treble settings are available only if EQ is
set to DSP Off.
FADER
- Press “Next Page” key to go to page 3 of Audio Key Menu
(if not already in page 3).
- Press “Fader” key to select from one of the following adjustments.
FAD-FRONT : Front Speaker Only
FAD-REAR : Rear Speaker Only
FAD-ALL : Front and Rear Speakers
Next Page
Key
Minus Key
Plus Key
Tone Key
Tone Icon
Fader Icon
Fader Key
EQUALIZATION
- Press “Next Page” key to go to page 3 of Audio Key Menu
(if not already in page 3).
- Press “Fader” key to select from one of the following adjustments:
Successive presses on EQ will allow you to choose from DSP Off,
Jazz, Pop, Classic, Rock, or Vocal.
- Press and hold EQ to enable or disable “LOUD” function.
INTRO SCAN MODE
- Press “Next Page” key to go to page 4 of the Audio Key Menu
(if not already in page 4).
- Press “Intro Scan” key to preview each song of the current disc for
about 10 seconds. Simply press Scan.
- Press again to turn off this feature.
EQ Key
EQ Icon
Intro Scan Key
Intro Scan Icon