Artel DigiLink DLC910, Инструкция по установке и эксплуатации

Страница: 12 / 28

2 DLC910 Function Module Installation and Operations Manual
DLC910 Function Module
DLC910 Module Functional Description
This section provides a functional description of the DLC910 module, including Figure 2 , which is a functional
block diagram of the module.
Figure 2. DLC910 Module Functional Block Diagram
Module Inputs and Outputs
The DLC910 module uses the following inputs and outputs:
• Two electrical rear panel connections as follows:
– One input BNC connector (IN).
– One output BNC connector (OUT).
• Two rear panel SFP transceiver sockets that support the use of optical, HD-BNC, or HDMI SFPs. For
details, see the ”Supported SFP Types” section on page 3 .
• Backplane connections for sharing signals with other host chassis modules.
• Front panel 75 Ohm HD-BNC output jack (MON) for local signal monitoring (see the ”Using the
Monitor Jack” section on page 11 ).