Artel DigiLink DLC910, Инструкция по установке и эксплуатации, Страница: 13 / 28

DLC910 Function Module Installation and Operations Manual 3
Supported SFP Types
Input Formats
The DLC910 supports the following input formats:
• 720 x 480i 59.94
• 720 x 576i 50
• 1280 x 720p, 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 frame rate
• 1920 x 1080i, 48, 50, 59.94, 60 field rate
• 1920 x 1080p, 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 frame rate
Output Formats
The DLC910 supports the following user-selectable output formats:
• 720p, 50 or 59.94 frame rate
• 1080i, 50 or 59.94 field rate
• 1080p, 50 or 59.94 frame rate
Supported SFP Types
The DLC910 supports the following SFP types:
Optical
The DLC910 can transmit the combined multiviewer output over any Artel standard optical SFP. You can use
this SFP type in a transport system to provide remote viewing of the multi-viewer output. The receiver portion
of an Artel SFP can also be used as a source for the multi-viewer.
HD-BNC
Artel HD-BNC SFPs can simultaneously transmit and receive. The DLC910 can transmit the combined multi-
viewer output over coax cable using the transmitter portion of an Artel DLSEHDBNC. This feature enables you
to route the signal to another module or other local equipment. You can use the receiver portion of an Artel
DLSEHDBNC as a source for the multi-viewer.
HDMI
Artel HDMI transmitter SFPs are available. The DLC910 can transmit the combined multi-viewer output to an
HDMI monitor using an Artel DLSEHDMI-TX. This feature enables you to route the signal to a monitor,
television, or similar equipment.