Artel DigiLink DLC910, Инструкция по установке и эксплуатации

Страница: 19 / 28

DLC910 Function Module Installation and Operations Manual 9
Overview of the DLC910 Module
• From the Output Settings panel, configure the following items:
–
View Mode
—From the drop-down list, select one of the following monitor display options:
•
Quad
—Displays the input from all four input sources, where each input displays
simultaneously in a separate display quadrant (see Figure 1 ). The DLC910 scales and
re-formats (if necessary) each input and places it in one of the four quadrants of the
output signal.
•
Full 1
,
Full 2
,
Full 3
, or
Full 4
—Displays only the specified source across the entire
monitor screen.
The output signal is driven to all of the following ports simultaneously:
• BNC Output (1)
• Monitor Output (1)
• Backplane Output (1)
• SFP Outputs (2) – (HDMI, Optical, or HD-BNC)
–
Format
—From the drop-down list select one of the following output video formats to generate:
•
1080i
—Interlaced video.
•
720p
—Progressive scan video.
•
1080p
—Progressive scan video.
The selected format is applied to the ports listed under View Mode above.
–
Frequency
—
From the drop-down list select one of the following frequencies (frames per
second):
• 50
• 59.94
• Click
Submit
.
The configuration is saved and the module is ready to process video.
Note:
The DLC910 automatically scales the incoming video and converts it to the selected
output format. For example, if the DLC910 is set to 1080i/50 and an SD-SDI input is
selected to be full screen, the output is converted to 1080i/50.
Note:
When an input is selected to be Full screen, the first audio group channel pair is passed
through to the output so that program audio can be monitored. The presence and level
of all audio channels are displayed in both Full and Quad mode.