Artec MULTIEYE, Руководство пользователя

Страница: 91 / 204

Configuring MULTIEYE-HYBRID 91
© 2008 artec technologies AG
8.5.3 Copying times
Move the mouse cursor to the day’
s abbreviation (e.g. Thu) located at
the top of the daily column.
Click on the field of the day to be
copied and with Drag&Drop
(left mouse key held down)
drag the cursor onto another day's
abbreviation.
8.5.4 Copying time settings to other cameras
Individual recording time settings can be transferred (copied) to every available
camera. You only need to select the specific cameras and check mark each field
under "Copy time settings to”. With a click on the button
[Copy]
the time
settings of the original camera are then copied to the additional cameras.
8.5.5 Timer options
Always start recording (Timer)
on program start up
With these timer options MULTIEYE´s recording can be finetuned. In many
cases it is required to start the recording with the start of the computer
(e.g. very important on stand alone systems),
Alarm recording only if
Timer is active
The MULTIEYE system can be configured in that way, that alarm recording
starts with the program and Timer recording is not yet started.
8.6 Ring storage: Configuring hard disks for recording
As already described in Chapter Hardware requirements – hard drives , at least two hard drives
should always be used in a MULTIEYE-HYBRID system. The first drive should be reserved for the
operating system, and the video data should be stored on the other hard drive(s).
17