Artec MULTIEYE, Руководство пользователя

Страница: 17 / 204

System Requirements 17
© 2008 artec technologies AG
3.3.2 Processors
Processors from Intel and AMD can be used.
Especially interesting are systems with multiple processors (Intel XEON) or multicore-processors like Pentium D,
because the MULTIEYE software supports multiple processors and multicore systems and that results in a notable
increase of the system performance. This is especially important when you want to use many IP-cameras.
Important:
Avoid a permanent CPU-stress of 80% and more.
3.3.3 RAM
The memory usage of the system should be at least 512 MByte and 1 GByte for 32-channel systems.
3.3.4 Harddisks
It makes sense to use at minimum two IDE-harddisks with UDMA-interface or SATA-harddisks. In case of safety
reasons the harddisks should be formatted with NTFS. SATA-harddisks require a mainboard based on the Intel
915 (or higher) chipset.
It makes sense to use more expensive server-harddisks, because the disks are permanently in operation and these
harddisks are specified for a 24/7 use.
The partitioning of the harddisks:
1. Harddisk
Partition 1: Operating system and software 20-40 GB
Partition 2: video-files which have to be analyzed
2. Harddisk(s) videodata (ring-storage) 120 GB and more
Important:
Make certain of an adequate harddisk-cooling and -ventilation!
3.3.5 Graphics cards
It's recommended to use graphics cards based on a GeForce 4 chipset or better and min. 32 MB memory.
Optimal are graphics cards with two monitor-outputs.
Screen-resolution: at least 1024x768 pixel at High-Color (16 Bit color-depth)