Artec MULTIEYE, Руководство пользователя

Страница: 65 / 204

MULTIEYE-HYBRID interface 65
© 2008 artec technologies AG
By clicking on the magnifying glass you access the zoom mode. The cursor in the camera window changes to a
magnifying glass. With this magnifying glass you can call up an area in the camera window and enlarge the
display. With the next click in the camera window, the entire image will be displayed again.
If an audio extension board has been installed in the system and an audio channel assigned to a camera,
the loud-speaker symbol will appear in the infobar of that camera. With this loud-speaker symbol you can
turn the audio monitoring function on and off.
The acoustic alarm signal is activated by default, but the alarm can also be deactivated.
(see also General configuration Audio ).
On a PC without an audio card, the sound is produced through the internal loudspeaker; with an audio card, it is
played over the external speakers.
7.4.2 Fullscreen display
When you double-click with the mouse on a camera window, the camera will be displayed in full-screen.
To return to MultiScreen, simply double-click on the full-screen display again.
7.4.3 Symbols in the camera window
The recording status of the individual cameras is indicated by yellow or red dots in the upper left-hand corner of
the camera window.
No dot: no recording
Yellow dot: on motion detection standby, no recording
Yellow dot with a red ring:
motion detection active; recording active
Red dot: continuous recording
No recording on this camera: no ring storage assigned to
it. (see also: Configuring ring storage )
7.4.4 Camera outage detection (Video loss)
MULTIEYE monitors the quality of the camera signal.
In case of camera outage (video loss) or if the video
signals are outside of the tolerance range, this image
appears for the specific camera.
71
91