Artec MULTIEYE Скачать руководство пользователя страница 39

Страница: 39 / 204

Installing video boards and software

5.1

Installation MULTIEYE-HYBRID and MULTIEYE-NET

5.1.1

Installation MULTIEYE-HYBRID

During the installation you have to insert the video board and possible add-on modules (e.g. EX-4, EX-24,

EX-IOC) into the system first, then to install the hardware system drivers and then afterwards the

MULTIEYE-HYBRID software.

5.1.2

Installation MULTIEYE-NET

If you install MULTIEYE-NET the installing of video boards is not applicable. Instead a dongle has to be connected

and installed. First you have to install the dongle-systemdriver and then - during the MULTIEYE software

installation - the WIBU-Key dongle driver.

5.2

Installing MULTIEYE video boards

The video board is inserted into one of the PC’s available PCI slots (DVR-Kit MP8200 PCI EX: PCI-Express Slot).

The following tips should be observed for the installation and activation of the video boards.

1. Switch the PC off and remove the power plug!

To avoid static electricity charges while installing the boards, you

should create a permanent ground if possible. If that is not possible, at

least discharge yourself by touching frequently a grounded object such

as a metal radiator

2. Remove the packing without touching the contacts on the underside

of the board

3. Insert the video board into one of the PC’s free slots

4. If applicable, insert the optional extension boards such as EX-4

and/or the EX-IO into the free slots, screw them down and connect

the bus cables with the video board.

(

Installing extension boards EX-4 and EX-IO

)

5. Connect the Watchdog cable as described here:

WatchDog

6. Connect the analog video cameras to the BNC inputs of the video

board

7. Close the PC casing and connect the power cable. Turn on the PC.

The new hardware will automatically detected by the operating system

Содержание MULTIEYE













































































































































































































Результаты поиска

Содержание MULTIEYE

Отзывы:

Бренды по названию

Популярные бренды

Artec MULTIEYE, Руководство пользователя

Результаты поиска

Содержание MULTIEYE

Отзывы:

Бренды по названию

Популярные бренды