ARTE MENTOR hydro Series, Инструкция по установке и эксплуатации

Страница: 25 / 42

INSTALLATION & USAGE MANUAL FIREPLACE | MENTOR Hydro
21 | Page
- TIMES ZONES mode
The regulator allows you to operate your fireplace with automatic switching
between modes based on certain time zones, using the CLOCK and SPECIAL
modes.
- Secondary control relay function
The regulator is equipped with a secondary control relay system whose
contacts can be used, for example, to stop the operation of another
heat source (e.g. gas boiler) or to command an additional pump or
solenoid when the water temperature reaches a predetermined value.
- TIME ADJUSTMENT SCREEN
The screen displays the current time and the current time zone (when their
feature is enabled).To adjust the hour press the CONFIRM (
6 ) key, so the
minutes field start flashing. Press the ( 4 ) ή ( 5 ) keys to change the value
and then press the TOGGLE ( 7 ) key to switch to the time field. After you
finish adjusting the hours field press the CONFIRM ( 6 ) button to register the
change (the time field will stop blinking).
- PARAMETERS SETTING screen
In the first view of the parameters display there is the
definition of "Parameters Level" with the default value
"0" which means that the parameters are not available.
In the first view of the parameters display there is the definition of "Parameters
Level" with the default value "0" which means that the parameters are not
available.
After changing the level to "1", "2", "3" or "4", the following views on the display
show the parameter values in the image on the right. The last screen displays
"****" which ends the definition of the operation parameters, followed by a
return to the first screen.
!
The parameters adjust the regulator according to the properties of the fireplace and of the central heating
installation. The new settings must be in agreement with the installer and the manufacturer of the fireplace. Any
careless changes can cause unstable and inefficient system operation.
!
If you make a change for which you are not sure and you have not registered, press the F2 (3) key to return to
the main display.
CLOCK SPECIAL
!
The regulator time zones are not enabled. Activation and potential adjustment to the parameters must be made in
agreement with the installer and if you understand the way they operate. Any careless changes can cause
unstable and inefficient system operation.
Relay deactivated(NO)
Relay activated (NC)
Time zone
(if enabled))
Parameter
Units
Parameter
limits Parameter
value