INSTALLATION
&
USAGE
MANUAL
FIREPLACE
| MENTOR Hydro
19 |
Page
-
Using the regulator
All of the regulator functions can be controlled via the control panel
(Pic. 6.5.1).
When the regulator is not operating,
the light
(
1
) illuminates amber to notify that it is in standby mode and the screen displays the water temperature in
the water jacket, the time and the time zone (if it is enabled). To activate the control panel press the F1 (
3
) key
once. To disable it hold the same key pressed for about 1 second.
1
Operation light
Red → failure
Amber → Stand by
Green → Normal operation
Flashing green → Manual operation
2
Graphic display screen
3
F1 Key ON/OFF
4
PLUS Key
5
MINUS Key
6
CONFIRM parameters Key
7
TOGGLE parameters Key
8
F2 Key
(ESC- return to the main display)
Pic. 6.5.1
The device status is indicated in the graphic display screen (
2
) in the form of text and images. It also includes
information on the operation of individual system components, temperature sensors and it allows changing
parameters.
Switching between the different displays is done by the TOGGLE (
7
) key. When you are in a display that allows any
parameter change you must press the CONFIRM (
6
) key. The parameter field will start flashing and you can now
change the value by pressing the (
4
) or (
5
) keys. If any display has more than one parameter fields, move
between them with the TOGGLE (
7
) key and by pressing the CONFIRM (
6
) key register that change.
!
If you do not register the altered parameter within 10 seconds, it will be ignored by the regulator. The field will
stop flashing and the parameter will revert to its previous value.
-
OPERATION screen
It displays the current temperature of the water in the water jacket of the fireplace and the degree of the air damper
in percentage. This screen is fixed and to change it you must press the TOGGLE (
7
) key.
Water jacket
temperature (
Τ
3)
Current
time
Time zone
(if enabled)
Air intake dumper
opening degree
Set
temperature
Air intake dumper
operation mode
In this screen you can change the temperature in the water jacket of the fireplace. By pressing the CONFIRM (
6
) key
the set temperature parameter field will start flashing. Press (
4
) or (
5
) to change the value and then press the
CONFIRM (
6
) key in order to register the change.
Also in this screen, when the MANUAL mode is selected and the operation light
(
1
) flashes green, you can manually
adjust the position of the air intake damper position in 10% increments. By pressing the (
4
) key it opens and by
pressing the (
5
) key it closes.
Содержание MENTOR hydro Series
