Arris TM02AA104, Руководство по установке

Страница: 19 / 52

Installing the Telephony Modem 2-5
Telephony Modem Installation Guide Release 4 Standard 3.0 Aug 2004
Procedure 2-1 (continued)
Installing the Batteries
3 Push the battery into the bay until it latches into place. The following photo
shows a Telephony Modem with both batteries installed.
Note 1: The Telephony Modem does not begin operating until you apply AC
power.
Note 2: If you use only one battery, insert the battery into bay 1 (as shown
above). Battery bay 2 is reserved for a second battery pack.
4 Replace the door. To do so, place the tabs of the battery door into the slot on
the telephony modem battery compartment. Rotate the door away from you
until the two latches snap back into place.
It is normal for the Battery 1 and Battery 2 LEDs to flash after initial
installation of the battery to show that the battery(ies) are charging.
Note: The TM402P and TM402Q models use a lithium-ion battery pack. The
battery does contain precious material, there may be some benefit in
recycling. Please dispose of the battery responsibly and in accordance with
local ordinances.
—end—
Bay 1
Tabs
Slot
Latches