ARRI SkyLink, Руководство пользователя

Страница: 13 / 20

13
ConfigurationConfiguration
13
.
Click “Save” after a change is made to store your new setting.
CRMX Link
Allows user to Link or Unlink all CRMX receivers powered on and in range of the SkyLink Base Station.
WiFi
Allows user to set the WiFi channel (1 through 11). Refer to the section on RF Management for more
details about selecting an operating channel in environments with multiple WiFi networks.
Click “Save” after a change is made to store your new setting.
SSID
This is the name of the WiFi network. The user can change this name to any they would like.
Click “Save” after a change is made to store your new setting.
Password
The user can set a custom password for the SkyLink Base Station WiFi network. The default password is
“ArriSkyLink”. Please note that passwords are case sensitive.
Click “Save” after a new password is set to store your new setting.
IP Settings Page
The IP Settings Page allows users to configure
different settings in relation to IP (Internet Protocol)
attributes.
DHCP Mode
Click “Save” after a change is made to store your new setting.
Minimum Outputs 5mW , suitable for small sized locations.
Low Outputs 25 mW , suitable for medium sized locations.
Normal Outputs 100 mW , suitable for large sized locations.
High (FCC Mode) Outputs 125 mW , suitable for locations with many obstructions.
Static IP (DHCP disabled) The SkyLink Base Station will have a static IP address and will not
generate IP addresses for connected devices.
Static IP + DHCP Server The SkyLink Base Station will have a static IP address and will also
generate IP addresses for connected devices.
Dynamic IP (DHCP Client) The IP address of the SkyLink Base Station and other IP devices on
the network will be set by a third party device (such as a network
router).
High (FCC Mode) output setting is only allowed for locations within the United States of America.
This mode is prohibited in locations outside of the USA.
NOTICE