ARRI SkyLink, Руководство пользователя

Страница: 9 / 20

9
Set UpSet Up
9
Set Up
Choosing a Location
Place the SkyLink Base Station on a stable surface, clear of obstructions. It is recommended that the unit
be elevated above nearby objects and people to minimize physical interference. Do not place SkyLink Base
Station in location that could result in injury or damage as a result of a fall.
Plug in SkyLink Base Station
Attach the included power supply into the 12 V DC barrel connector input on the rear of the SkyLink Base
Station. Attach the included NEMA 5-15P (USA) or Schuko (Europe) power cable to the power adapter,
then plug it into an AC power receptacle. The SkyLink power supply is compatible with voltages ranging
from 100V-240VAC.
Plug in SkyLink Receiver
Simply plug the SkyLink Receiver into the DMX IN port on your ARRI SkyPanel or other DMX capable fix-
ture. The XLR connector can swivel 180º to provide necessary clearance. Plug the USB-A tail into the USB
port below the DMX IN on your SkyPanel to provide power. Check, if the USB mode of the SkyPanel is set
to „Normal“. Otherwise the SkyLink Receiver is not powered and will not work.
Power On
Flip the Power switch downward to power on the SkyLink Base Station. The unit will power on and be ready
within 10 seconds.
Connect to SkyLink Base Station
You can now connect to the ARRI SkyLink system using WiFi, Ethernet, or DMX. See how in the section
“General Operation” on page 10.