ARRI ARRIFLEX 235 Скачать руководство пользователя страница 112

Страница: 112 / 178

112

Inverse

This menu changes the appearance of all man-readable

windows. The format markings are not changed. If inverse

OFF is selected, the characters will appear white. If the

background is BOXED it will appear black in this case. If

inverse ON is selected, the characters will appear black.

If the background is BOXED it will appear white in this case.

• Move the cursor

with the keys

and

to the line

– INVERSE. The keys

will switch between ON

and OFF.

Fine Positioning

By changing the setting in the line Fine Position of this submenu

it is possible to simultaneously shift all man-readable windows

vertically by one video line (ﬁne adjust). The single steps

are smaller than the steps in the normal position mode.

This will place all windows as far outside the actual image

area as possible. Format markings are not moved.

• Move the cursor

with the keys

and

to the line

– FINE POS.. By pressing the key

the value will increment

starting from 0 to 9, after that it will go back to 0. Higher

values will cause the windows to be at a higher video line.

They will therefore appear lower on the video screen.

The key

will increment in the opposite direction.

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

- LINE INTERP.

- BNC OUT

VBS

- Y/C DATA

- MINI MON DATA

- TXT WHITE LEV.

-> - TXT INVERS

- TXT FINE POS

- EXIT

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

- LINE INTERP.

- BNC OUT

VBS

- Y/C DATA

- MINI MON DATA

- TXT WHITE LEV.

- TXT INVERS

-> - TXT FINE POS

- EXIT

Video-Assist-System

Содержание ARRIFLEX 235



















































































































































































Результаты поиска

Содержание ARRIFLEX 235

Отзывы:

Похожие инструкции для ARRIFLEX 235

Бренды по названию

Популярные бренды

ARRI ARRIFLEX 235, Инструкция по эксплуатации

Результаты поиска

Содержание ARRIFLEX 235

Отзывы:

Похожие инструкции для ARRIFLEX 235

Бренды по названию

Популярные бренды