background image

14

Multifunction LCD Digital Timer

Operation in Run Mode

Operation in Run Mode

Present value

Present value

OFF set value

ON set value

Set OFF set time 

with

 the corresponding                                         keys.

Set ON set time 

with

 the corresponding                                          keys.

Present value and OFF Set Time

The present value is displayed in the main display and the OFF Set Time is displayed in the sub-display. 

"A"and'' Range '' light at the same time.

Present value and ON Set Time

The present value is displayed in the main display and the OFF Set Time is displayed in the sub-display. 

"B"and'' Range '' light at the same time.

Explanation of functions

OFF Time range (timr)

Set the range to be timed in the range 000.000s to 999999h.

ON Time range (timr)

Set the range to be timed in the range 000.000s to 999999h.

Timer Mode (timm)

Set either the elapsed time (UP) or remaining time (DOWN) mode.

ON/OFF Start Mode (totm)

Set either the flicker OFF start or flicker ON start.

For details on start mode, refer to “timing charts”.

Input signal width (iflt)

Set the minimum signal input width (20ms or 1ms) for signal, reset, and gate inputs.

NPN / PNP Input Mode (imod)

Select NPN input (no-voltage input) or PNP (voltage input) as the input format. The same setting is used for 

all external inputs. For details on input connection, refer to “input connections” on page 25.

Key Protection Level (kypt)

When the key protection switch is ON, it is possible to prevent setting error by prohibiting the use of certain 

operation keys by specifying K/P level (KP-1 to KP-5). For details, refer to “Key Protection Setting Mode” on 

page 9

Содержание TC-Pro480 Series




































Отзывы: