Laguna
English
16
05060021 04 04/08/2015
5. Identification - Plate data (Fig. 2)
On the back of the cabinets a plate with the following characteristics data is present:
1) Name and address of the manufacturer
2) Name and length of the cabinet
3) Cabinet code number
4) Cabinet serial number
5) Supply voltage
6) Power frequency
7) Input current
8) Electric power absorbed during the refrigeration phase (Fans + hot lighting)
9) Electric power absorbed during the defrosting phase (Hot fans + evapo lighting)
10) Lighting power (where foreseen)
11) Net display surface
12) Net load volume
13) Type of refrigerant fluid with which the plant operates
14) Environment climatic categories and reference temperature
15) Protection class against humidity
16) Job order number with which the cabinet has been manufactured
17) Order number with which the cabinet has been produced
18) Cabinet year of production
In case of technical assistance, in order to identify the cabinet communicate the following:
- the product name (2); the serial number (4); the job order number (16)
6. Transportation (Fig. 3)
The cabinets are supplied on a wooden support fixed to the base for movement with forklift trucks.
Always position the forks at the point specified on the wooden support to avoid the risk of
overturning
. Use a manual or electrical forklift truck that is suitable to moving the cabinet in question.
It must have a nominal capacity of at least 1,000 kg.
7. Receipt and first cleaning
On receiving the cabinet:
- make sure that the packaging is integral and no evident damage is present;
- remove the packaging with care so as not to damage the cabinet;
- check all parts of the cabinet ensuring that its components are integral;
- if damaged, immediately call the supplier;
- use neutral products for a first cleaning of the cabinet. Dry with a soft cloth, do not use abrasive
substances or metallic sponges
- do not use alcohol or similar products for the methacrylate parts (plexiglass).
For a correct disposal of the packaging take into consideration that it consists of:
Wood - Polyester - Polythene - PVC - Cardboard.
8. Installation and environment conditions (Fig. 3)
Do not position the cabinet:
- in environments with the presence of explosive gas substances;
- in open areas and therefore exposed to atmospheric agents;
- near to heat sources (direct solar light, heating plants, incandescent lamps etc.)
5
40
40
23,9
18,8
7
35
75
30,0
27,3
8
23,9
55
14,3
10,2
The weight of water vapor in dry air is one of the main points that affect the performance and
power consumption of the cabinets
Declaration of
conformity
A copy of the conformity statement is annexed to the cabinet
If you lose the original copy of the Declaration of Conformity supplied with
the cabinet, download a copy by filling out the form available on the internet
addresses:
- for Italy: http://www.arneg.it/conformita/it
- overseas: http://www.arneg.it/conformita/en