Arjohuntleigh Maxi Air Скачать руководство пользователя страница 7

Страница: 7 / 40

Preparations

Actions Before First Use (8 Steps)

1 Visually inspect the

Maxi Air

system for damage.

2 Check that all parts are supplied. Compare with

section

Parts Designation

in this

IFU

If any part is missing or damaged - do NOT use
the product!

3 Read the

IFU

4 Disinfect the

Maxi Air

air supply

See section

Disinfection Instructions

5 Perform a functionality test

See section

Care and Preventive Maintenance.

6 Find a good ventilated dry area for storing the

Maxi Air.

7 Choose a designated area where the

IFU

should

be kept, accessible at all times.

8 Make sure to have a rescue plan ready in case of a

patient emergency.

Below is the direction of the

Maxi Air

mattress:

Head end

Foot end

Left

Right

Actions Before Every New Patient (6 Steps)

1 Select a suitable

Maxi Air

mattress

size according

to sections

Correct placement of the patient

and

Product Specifications.

2 Check that all parts of the

Maxi Air

is in place.

Compare with the section

Parts Designation

this

IFU

3 Carry out a thorough inspection for damage.

4 If any part is missing or damaged - do NOT use

the product!

5 Enter the patient name and date on the

Maxi Air

mattress label. See section

Labels on the Maxi Air

Mattress

Make sure the

Maxi Air

air supply is disinfected

according to section

Disinfection Instructions

Actions Before Every Transfer

(with same patient)

1 Check that all parts are in place. Compare with the

Parts Designation

in this

IFU

2 Carry out a thorough inspection for damage.

3 If any part is missing or damaged - do NOT use

the product!

WARNING

To prevent cross-contamination, always
follow the disinfection instructions in
this

Instructions for Use.

NOTE
If you have any questions, please contact your
local ArjoHuntleigh representative for support
and service. The contact information

(ArjoHuntleigh addresses)

is listed on the last

page of this

IFU

Содержание Maxi Air









































Результаты поиска

Содержание Maxi Air

Отзывы:

Похожие инструкции для Maxi Air

Бренды по названию

Популярные бренды

Arjohuntleigh Maxi Air, Инструкция по эксплуатации

Результаты поиска

Содержание Maxi Air

Отзывы:

Похожие инструкции для Maxi Air

Бренды по названию

Популярные бренды