Arjohuntleigh Maxi Air Скачать руководство пользователя страница 21

Страница: 21 / 40

Disinfection of the

Maxi Air

air supply and air

hose

(20 steps)

Step 1 - 5 Removing visual residue

1 Use protective gloves and glasses.
2 Disconnect the

Maxi Air

air supply from the

power supply and the air hose from the

Maxi Air

mattress.

3 Remove the air hose from the

Maxi Air

air supply

by turning the hose socket

(A)

counter clock-wise

and pull the air hose out.

(See Fig. 1)

4 Plug the air outlet of the

Maxi Air

air supply with

a cloth or a disposable towel to prevent moisture/
water/cleaning fluid to enter the

Maxi Air

air

supply.

5 Clean the

Maxi Air

air supply and air hose from

visible residue using a cloth or soft brush soaked
in water alt. spray with water and wipe with a
clean cloth. Start from top and move downwards.

Step 6 - 10 Cleaning

6 Spray cleaning fluid on

Maxi Air

air supply. Use

a brush or a cloth if need for cleaning (to remove
any deposits).

7 Use a new wet cloth to wipe off all traces of

cleaning fluid or if more suitable by spraying
water and wipe with a clean cloth. The cloth
should occasionally be rinsed in running water
when removing cleaning fluid.

Fig. 1

8 Roll up the air hose and lower it down into

cleaning fluid. Scrub the hose with a brush.

9 Rinse the air hose with water (approx. 25

⁰

C) to

remove cleaning fluid.

10 If cleaning fluid cannot be removed in step 7 and

step 9 spray water on the affected part and wipe
off with disposable towels/cloth. Repeat until all
of the cleaning fluid has been removed.

Step 11 - 20 Disinfection

11 Spray cleaning fluid on the

Maxi Air

air supply.

12 Allow a disinfection time according to the

instructions on the disinfectant bottle label.

13 Roll up the air hose and lower it down into new

cleaning fluid.

14 Allow a disinfection time according to the

instructions on the disinfectant bottle label

15 Use a new wet cloth to wipe off all traces of

cleaning fluid on the

Maxi Air

air supply or if

more suitable by spraying water and wipe with a
clean cloth. The cloth should occasionally be
rinsed in running water when removing cleaning
fluid.

16 Rinse the air hose with water (approx. 25

⁰

C) to

remove cleaning fluid.

17 If cleaning fluid cannot be removed in step 15 and

step 16 spray water on the affected part and wipe
off with disposable towels/cloth. Repeat until all
of the cleaning fluid has been removed.

18 Let the

Maxi Air

air supply

dry.

19 Hang the air hose to drain water and air-dry.

20 When dry, insert the air hose socket to the

Maxi

Air

air supply socket inlet. Make sure it clicks into

place.

Содержание Maxi Air









































Результаты поиска

Содержание Maxi Air

Отзывы:

Похожие инструкции для Maxi Air

Бренды по названию

Популярные бренды

Arjohuntleigh Maxi Air, Инструкция по эксплуатации

Результаты поиска

Содержание Maxi Air

Отзывы:

Похожие инструкции для Maxi Air

Бренды по названию

Популярные бренды