26
746-449-SA-5
Bed angle
indication
When operating the controls for backrest, thigh section,
kneebreak or tilt, the weighing system display shows the
approximate angle (in degrees) of the selected function.
Angles are shown relative to the ground, so the displayed
values of backrest, thigh or kneebreak angle change when
the bed is tilted.
The tilt angle is shown as a positive value when the bed is
in foot down tilt and negative when in head down tilt.
The angle display is for indication only. The values shown
may not be exact due to variations in manufacture.
Extra-low
height
When the mattress platform is at low height, the bed can
be lowered by a further 8cm (approximately) as follows:
Press and hold the
mattress platform height
Function
key; at the same time, press and hold the
Down Direction
key. Hold down both keys until the mattress platform
stops moving.
Caution
At extra-low height, clearance below the bed is reduced. Take
care when using patient hoists with the bed in this position.
