Arjohuntleigh Citadel Patient Therapy System C100, Инструкция по эксплуатации

Страница: 34 / 48

34 Citadel Patient Therapy System
Patient Turn is not available when fowler angle is above 30
or any side rail is down. It is recommended that turning only
be initiated when bed is level and thigh and calf sections are
down.
The actual angle of rotation achieved by a patient is
dependent on many factors including: patient weight,
patient weight distributions, pressure settings and patient
positioning on the mattress surface. 20 is the target turn
angle, but will not be achieved by all patients based on the
variables mentioned above.
Therapies
Continuous Patient Turn - continuously rotates the patient 20 right, center,
then 20 left pausing at each position for the set hold time. In order to activate
this function, all side rails must be up and the fowler angle must be less than
30 . If any side rail is lowered or the fowler angle is increased to above 30 ,
this function will be cancelled. Press the Continuous Patient Turn button to
cancel therapy; this function will not automatically time out.
Rotation therapies are not available when fowler angle is
above 30 or any side rail is down. It is recommended that
turning only be initiated when bed is level and thigh and calf
sections are down.
The actual angle of rotation achieved by a patient is
dependent on many factors including: patient weight,
patient weight distributions, pressure settings and patient
positioning on the mattress surface. 20 is the target turn
angle, but will not be achieved by all patients based on the
variables mentioned above.
Alternating Pressure / Pulsation
Alternating Pressure -
state is held for a period of time. The total time taken to complete this is one
cycle.
Pulsation -
this is held for a period of time. The total time taken to complete this is one
cycle. Cycle times and intensity are selectable by the user. Intensity settings
for each therapy are described below: