Arjohuntleigh Citadel Patient Therapy System C100 Скачать руководство пользователя | Manualshive

Страница: 20 / 48

background image

20

Citadel Patient Therapy System

CONTROL PANEL

min

min

min

Citadel

Patient Therapy System Control Panel

Power On / Off Button

- Press and hold for two seconds to

turn

Citadel

Patient Therapy System on or off. LED will light

and an audible tone will sound. Bed must be plugged into AC

power for control unit to turn on.

Lock Out Button

- Press and hold for two seconds to

activate or deactivate lockout of all control unit functions.

Pressing the CPR button overrides all lockouts.

Side Rail Down Indicator

- Lights up when the left or right

side rails are down.

Fowler Angle Indicator

- Lights up when fowler angle is

greater than 30 .

Alarm Indicator

- Lights up when an alarm or alarm

condition exists in the

Citadel

Patient Therapy System. The

icon will turn off when all alarm conditions are no longer

present and the alarm has been acknowledged by pressing

the Alarm Silence / Clear Button.

Alarm Silence / Clear Button

- Press to acknowledge an

alarm. Pressing this button will clear an alarm indicator for a

condition that has been resolved. If the alarm condition has

not been resolved, pressing the button will mute the alarm

for ten minutes. If the condition causing the alarm is not

corrected within ten minutes the alarm tone will resume.

- Press to activate or deactivate seat

cushions of the body section in order to assist with patient

exit and bedpan placement. An audible tone will sound to

indicate when the pressure in the seat section has dropped

by 50%. Periodically an audible tone will sound to remind the

user that the function is still active.

«
...
18
19
20
21
22
...
»

Содержание Citadel Patient Therapy System C100

















































Отзывы:

Нет отзывов

Похожие инструкции для Citadel Patient Therapy System C100

Бренд: THORLABS Страницы: 44

Бренд: Dairyland Страницы: 21

Бренд: Cameo Страницы: 64

Бренд: Cameo Страницы: 100

Бренд: CAME Страницы: 32

Бренд: xsto Страницы: 76

Бренд: F&V Страницы: 5

Бренд: F Care Systems Страницы: 2

Бренд: HALDER Страницы: 2

Бренд: Hakko Electronics Страницы: 16

Бренд: M-system Страницы: 5

Бренд: MA Страницы: 2

Бренд: olympia electronics Страницы: 4

Бренд: PASCO Страницы: 5

Бренд: Pasco Scientific Страницы: 27

Бренд: PARUS Страницы: 6

Бренд: Tascam Страницы: 78

MINISTUDIO CREATOR US-42

Бренд: Tascam Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды